MULE Trailer w/ Quick Release Tow Bar
MULE with Tow Bar Bundle includes:
- (1) MULE with Pull Handle
- (1) Rear Axle Bike Tow Bar Assembly
- (1) 4-way Stretch Cargo Net
-The Rear Axle Bike Tow Bar Assembly comes with a Hitch Plate that can mount to bike rear axle diameters of 5mm – 12.7mm (0.2’’ – 0.5’’). If you have any question whether your bike’s rear axle will connect to our bike hitch plate please reach out to us. If your bike has a less common axle or you need additional mounting options visit our friends at The Robert Axle Project
– 6063 Aircraft grade aluminum and hardened steel
– All components are easily removeable: Fabric, roll bars, handle, etc.
– Lifetime limited warranty
PULL-TOW-HITCH™ + Dual-Axle™ Technology
is designed to effortlessly haul your gear wherever you need to go. Tow it behind your e-bike or Pull it by hand.
– We recommend washing saltwater off the MULE after maritime adventures
– Assembled product dimensions: 35″”(l) x 29″(w) x 27″(h)
– Interior cargo dimensions: 27″(l) x 18″(w) x 16″(h)
– Elastic cargo net included with every MULE
– Approx. weight 20lbs
– Full User Manual can be found here
-The Bike Tow Bar Assembly comes with a Hitch Plate that can mount to bike rear axle diameters of 5mm – 12.7mm (0.2’’ – 0.5’’). If you have any question whether your bike’s rear axle will connect to our bike hitch plate please contact reach out here. If your bike has a less common axle or you need additional mounting options visit our friends at The Robert Axle Project
The MULE Tow Bar comes with a Hitch Plate that can mount to bike rear axle diameters of 5mm - 12.7mm (0.2’’ - 0.5’’). If you have any question whether your bike's rear axle will connect to our bike hitch plate visit our friends at The Robert Axle Project (https://bit.ly/3jOFLs1) to locate a hitch adapter or thru axle for your bike!
The Mule connects to a bike's rear axle via our custom steel attachment piece. This piece stays on the bike, and the Mule attaches/detaches via a quick release pin. It takes about 4 seconds to remove.
Yes! We love pets. The e+kMULE can carry loads up to 100lbs and the Mesh Cover was designed specifically for keeping your pet safe. Always adhere to our cargo weight and speed recommendations, especially with precious cargo in tow.
100 lbs.
The wheels, handle bar, and blue roll bars can be quickly removed and placed into the storage compartment. The measurements when the e+kMULE is packed for storage is 32’’ length x 20’’ width x 16’’ height.
16"x3" pneumatic tires
There are scenarios where the smaller front wheels can touch down but it is quite rare and they are designed to take a beating! The tow bar keeps these smaller wheels at a consistent relationship to the bike. Whenever the rear wheel goes over a large bump it carries the small front wheels directly over with it so they avoid most contact.
The smaller front wheels on the e+kMULE are part of our patented Dual-Axle™ Technology. They are strategically positioned to allow one to easily tilt and mount the e+kMULE onto our vehicle hitch adapter without removing loaded coolers and other heavy gear. They also keep the wagon balanced when pushing or pulling by hand!
Yes, with limits! Link to the full warranty at the bottom of the page.
The Quickrack is NOW AVAILABLE as a bundle with the MULE!
Not yet but we hope to in the future!